Cheapest Factory Extended Stem Butterfly Valve - butterfly buffering check valve – GMK Valve

1. The kind of valves are automatic type which are opened by the pressure of the medium and closed the revrsing flow, the better the sealing is and the higher the reversing flow pressure.

2. The water hammer rising has been taken into considerration during design, it is realiable.

3.It has damper device , it can regulate closing by quickly closing and slowly closing two stages, and the quickly closing time and the slowing closig time can regulate , it can prevent the dump or blower fan from reversing or the overload hammer pressure, in order to protect the system safety.

4 As it has no weight on the shaft, in the open position, all forces of the disk is balance, it can reduce the flow resistance.

The product has novel structure, small size, fluid resistance small, smooth operation, reliable sealing, wear resistance, cushioning performance and good features, is the best industrial water and sewage products.

The valve used for industrial water supply buffer, sewage treatment plants, pump outlet to prevent the pipe network upstream.

Product overview

The H47X, H47H, HH47X, HH47H, H47XF and HDH47X butterfly type check valves produced by our factory are mainly used in the water outlet of industrial water supply and sewage treatment plants to prevent the medium countercurrent in the pipe network. Active destruction of destructive water hammer, so as to ensure that water pumps and pipelines are not damaged. The valve is characterized by its valve body, cutting and buffering performance. It is the best product for industrial water and urban sewage disposal.

Important technical parameters
Nominal pressure: 1 ~ 2.5MPa
Nominal: 40 ~ 1400mm
Applicable medium: water, oil, sewage, sea water
Applicable temperature: 0~80 DEG C (if necessary, up to 200)

 Important parts and materials