knife gate valve with pneumatic actuator
The knife gate valve is a unidirectional wafer knife edge gate valve used on industrial pipeline for on-off operation. The structure of body and seat eliminates clogging shutoff for flow with fine particles. Additionally, beveled knife edge helps the gate cut through thick media easily
According to different working situation: non-rising stem knife gate valve, wafer knife gate valve, lugged knife gate valve, pneumatic knife gate valve, electric knife gate valve, manual knife gate valve and bevel gear knife gate valve are all available.
- Guide claws design at the port bottom for gate fixture, instead of a groove, eliminates any potential clogging when valve shutoff.
- Integral body design ensures smooth flow, easy assembly and smaller shell leakage possibility.
- Beveled knife edge provides strong cutting stress and tight sealing.
- PTFE resilient point guider above the port prevents metal-metal contact between gate and body.
- Gate thickness can be increased to meet higher pressure.
- Side-entry seat is replaceable, reducing the cost of maintenance.
- Preloaded seat is adjustable to meet different sealing class and compensate normal seat wear.
- Seat retainer covers the side of seat and prevents seat from direct flow flushing.
- Double thrust bearing minimize the torque required for operation.
- Stem Cover is available
- Grease Nipple is available
- Bearing Cover is available
DN 50~600mm NPS 2”-24”
(Large diameter on request)
NBR：90°C EPDM: 120°C
Viton: 200°C PTFE: 200°C
Metal seal :304/316+Satellite
Max Working pressure:
DN50~DN250: 10Bar NPS2~NPS10：150Psi
DN300~DN450: 7Bar NPS12~NPS18：90Psi
DN500~DN600: 4Bar NPS20~NPS24: 60Psi
Face to Face: MSS SP-81
GB/T 9113.1, JB/T 79.1,HG 20592,
ASME B 16.5, EN1092-1 (other connections on request)
Pulp & Paper / Water & Waster Water /Mining / Metallurgy/
Petrochemical /Printing & Dying / Pharmacy/ Beverage & Food